|
Other Industrial Oil Cleaning Systems
| KLAROL Oil Cleaning Systems can also be used to clean other industrial lube oils like gear oils, transformer oils, hydraulic water glycol, honing oils. compressor oils, synthetic oils, spindle oils,high viscosity lubricating oils, morg oil and fire resisting fluids. |
 
|
|
KLAROL COC-2 Mobile Machine This machine is designed to remove solid contamination, sludge, varnish and lacquer in by its surface filters installed in series and by two KLAROL depth filters. Water can be absorbed by KLAROL depth filters if the medium is changed from fiber glass to cellulose. |
Send Online Query  
KLAROL COC- 4 Mobile Machine This machine removes sludge, solid contamination, varnish and lacquer using its surface filters installed in series and by four KLAROL depth filters. If the medium is changed from fiber glass to cellulose KLAROL depth filters absorb water. |
|
Send Online Query
|
|
How Does KLAROL Industrial Oil Cleaning / Purification Systems Work? The oil is first cleaned by the surface filters i.e. up to 149 microns by the washable suction filter and up to 10 microns by a filter installed after the pump.
It is then cleaned by the KLAROL fiber glass or cellulose depth filters. It enters (zoom the cross section) the depth filter from the bottom.
Here the compressed fiber glass medium removes high amount of solid contamination down to less than a micron. Sludge, varnish and lacquer are also removed by this filter. If the oil is contaminated with water, fiber glass filters are replaced with cellulose filters which are used to absorb the same.
Clean oil exits from the oil outlet. Continuous cycling can remove contamination down to NAS 4. Filter change is done by removing the top cover and is easily done. |
Send Online Query
Klarol Gear Oil Cleaning Machine |
|
Send Online Query
|
Showcase
View all our products / services as a slide show.
Play Now
 
|
Copyright © Klassic Klarol Filters Private Limited, All Rights Reserved (Terms of Use)
